width="277"

>>>welcome to www.coinelectronic.com
single-coin acceptor
GD060 coin acceptor
GD066 coin acceptor
GD090 coin acceptor
GD006 coin acceptor
GD007 coin acceptor
GD052 coin acceptor
GD105 coin acceptor
GD168 coin acceptor
CAOJI coin acceptor
GD2008 coin acceptor
multi-coin acceptor
GD315 coin mechanism
GD400 coin mechanism
GD500 coin mechanism
KOREAWON coin mech
JAPANYEN coin mech
UK POUND coin mech
THAILANDBATH coinmech
EURO coin mechanism
bill validator
GD 68 bill acceptor

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GD68 BILL VALIDATOR,ACCEPTOR, MECHANISM
GD68 BILL VALIDATOR

GD68 BILL VALIDATOR

Bill insertion

4-way Acceptance

Recognition Speed

About 3s

Interface

Pulse,RS232 or M.D.B

Power Sources

DC 12V ± 5%

Power consumption

Standby Mode :200mA Operating Mode :860mA~2.0A Motor Lock :2.2A

Environment Range

Operating temp. :0 � ~55 � Conserving temp. :-20 � ~60 � Humidity :30%~85%RH

Weight

About 800g

Acceptance rates

96% or greater � The following bills are excluded: 1 . Incomplete bills such as extremely dirty, wet, broken or wrinkled ones; 2 . Bills folded at a corner or side; 3 . Incorrect-made bills.

Characteristics

1. Special Anti-Fishing structure. 2. Ultimate acceptance rates. 3. Fast and efficient bill handling 4. Easy to remove/open /clean acceptor. 5. Auto self-adjusting sensor system. 6. Quick to update software. 7. Combines the bill handling and the bill recognition system to increase acceptance rates and reduce jams

Applicable countries ' bill

China, Brazil, Russia, Korea, America, Thailand, Singapore, etc.

 

II. Interface harness

PIN1 (YELLOW) : INH+ PIN2 (GREEN) : INH-PIN3 (BLACK) : RS232-TX PIN4 : NC PIN5 (RED) : 12V POWER PIN6 (WHITE) : RS232-RX PIN7 (BLUE) : VEND+ PIN8 (PUEPLE) : VEND-PIN9 (BROWN) : GN D

III. Indicator LED status

•  Green LED flashing shows that the machine is working ;

•  Red LED always on shows that machine is suspended ;

•  Both red and green LED turned off shows that machine is power off;

•  The red LED flashing shows the machine has problem , which can be determined through its flash times as follows:
IV. Dimensions

FLASHES

STATUS

Motor or motor sensor error.

Main sensor error.

Anti-fishing bills sensor error

Cash Box full

ROM Check error

Bill jammed

Resolution ratio:1024*768   |  Tel:86-570-8019790  |  Fax:86-570-3853109  |  Email: coinmech@gmail.com  
© 2007-2008  GANGDUELECTRON. http://www.coinelectronic.com  Power by GANGDU