GD830 Comparable coin acceptor mechanism

GD830 Comparable coin acceptor (TOP ENTRY CPU EQUALIZER WITH COIN REJECT LEVER).

TOP ENTRY CPU EQUALIZER WITH COIN REJECT LEVER.
Drop Inserting Type.
6. VR tunning for sensitivity of coin acceptance.
Turn clockwiste (+) for slackacceptance.
Turn anti-clockwise(-) for tightacceptance.
Coin drop speed timing preset in Sshape sliding passage CPU lock againstunusual moveabnormal stay reverse draw 500ms ~ 5 seconds lock outalong with operation auto-recovery.

Compatible with wide variety of Cabinet, Door Frame.
Coin diameter double check in slot opening lid entrance by diameter-rail sampling clamp for preventing bigger invalidcoin from inserting .
Spring lid-wiring fully sweep sluggish coins off passage byreject lever for free from coin jam.

More than millions times strong stroke durability of solenoidfor the best performance of coin selecting .

1. Remove yellow plastic token & replace your coin to sampling clamp;
2. Adjust diameter-rail of lid for preventing bigger invalid coins from insering:
3. Drive screw off lid-wing if coin thickness more than 2.5mm:
4. Connect loom to host machine as following lines guide : White line(N.C. signal)
Green line(N.O. signal)
Gray lineCounter (Meter)
Yellow lineinhibit/low(<+1V)
Red linePower DC +12V
Black LineGround (GND)
5. Switch Time Duration for correct triggering of coinacceptance if necessary .
Long duration of Pulse :. 100ms
Common duration of Pulse :50ms
Short duration of Pulse :20ms
6. VR tunning for sensitivity of coin acceptance.
Turn clockwiste (+) for slackacceptance.
Turn anti-clockwise(-) for tightacceptance.